FLIR Systems B Serie Manual Del Usuario página 29

Legal disclaimer
All products manufactured by FLIR Systems are warranted against defective materials and workmanship for a period
of one (1) year from the delivery date of the original purchase, provided such products have been under normal
storage, use and service, and in accordance with FLIR Systems instruction.
All products not manufactured by FLIR Systems included in systems delivered by FLIR Systems to the original pur-
chaser carry the warranty, if any, of the particular supplier only and FLIR Systems has no responsibility whatsoever
for such products.
The warranty extends only to the original purchaser and is not transferable. It is not applicable to any product
which has been subjected to misuse, neglect, accident or abnormal conditions of operation. Expendable parts are
excluded from the warranty.
In the case of a defect in a product covered by this warranty the product must not be further used in order to prevent
additional damage. The purchaser shall promptly report any defect to FLIR Systems or this warranty will not apply.
FLIR Systems will, at its option, repair or replace any such defective product free of charge if, upon inspection, it
proves to be defective in material or workmanship and provided that it is returned to FLIR Systems within the said
en-US
one-year period. FLIR Systems has no other obligation or liability for defects than those set forth above.
No other warranty is expressed or implied. FLIR Systems specifi cally disclaims the implied warranties of merchant-
ability and fi tness for a particular purpose.
FLIR Systems shall not be liable for any direct, indirect, special, incidental or consequential loss or damage, whether
based on contract, tort or any other legal theory.
Copyright
© FLIR Systems, 2008. All rights reserved worldwide. No parts of the software including source code may be repro-
duced, transmitted, transcribed or translated into any language or computer language in any form or by any means,
electronic, magnetic, optical, manual or otherwise, without the prior written permission of FLIR Systems.
This manual must not, in whole or part, be copied, photocopied, reproduced, translated or transmitted to any elec-
tronic medium or machine readable form without prior consent, in writing, from FLIR Systems.
Names and marks appearing on the products herein are either registered trademarks or trademarks of FLIR Sys-
tems and/or its subsidiaries.
All other trademarks, trade names or company names referenced herein are used for identifi cation only and are the
property of their respective owners.
Quality assurance
The Quality Management System under which these products are developed and manufactured has been certifi ed
in accordance with the ISO 9001 standard.
FLIR Systems is committed to a policy of continuous development; therefore we reserve the right to make changes
and improvements on any of the products described in this manual without prior notice.
Patents
This product is protected by patents, design patents, patents pending, or design patents pending. See the reference
manual on the CD-ROM for a complete list.
Warnings
This equipment generates, uses, and can radiate radio frequency energy and if not installed and used in accordance
with the instruction manual, may cause interference to radio communications. It has been tested and found to com-
ply with the limits for a Class A computing device pursuant to Subpart J of Part 15 of FCC Rules, which are designed
to provide reasonable protection against such interference when operated in a commercial environment. Operation
of this equipment in a residential area is likely to cause interference in which case the user at his own expense will
be required to take whatever measures may be required to correct the interference.
(Applies only to cameras with laser pointer:) Do not look directly into the laser beam. The laser beam can cause
eye irritation.
Do not disassemble or do a modifi cation to the battery. The battery contains safety and protection devices which, if
they become damaged, can cause the battery to become hot, or cause an explosion or an ignition.
If there is a leak from the battery and the fl uid gets into your eyes, do not rub your eyes. Flush well with water and
immediately get medical care. The battery fl uid can cause injury to your eyes if you do not do this.
Do not continue to charge the battery if it does not become charged in the specifi ed charging time. If you continue
to charge the battery, it can become hot and cause an explosion or ignition.
Only use the correct equipment to discharge the battery. If you do not use the correct equipment, you can decrease
the performance or the life cycle of the battery. If you do not use the correct equipment, an incorrect fl ow of current
to the battery can occur. This can cause the battery to become hot, or cause an explosion
and injury to persons.
Make sure that you read all applicable MSDS (Material Safety Data Sheets) and warning labels on containers before
you use a liquid: the liquids can be dangerous.
Cautions
Do not point the infrared camera (with or without the lens cover) at intensive energy sources, for example devices
that emit laser radiation, or the sun. This can have an unwanted effect on the accuracy of the camera. It can also
cause damage to the detector in the camera.
Do not use the camera in a temperature higher than +50 °C (+122 °F), unless specifi ed otherwise in the technical
data section. High temperatures can cause damage to the camera.
(Applies only to cameras with laser pointer:) Protect the laser pointer with the protective cap when you do not op-
erate the laser pointer.
Do not attach the batteries directly to a car's cigarette lighter socket.
Do not connect the positive terminal and the negative terminal of the battery to each other with a metal object
(such as wire).
Do not get water or salt water on the battery, or permit the battery to get wet.