Notes; Safety Notes; General Safety Notes - Berner LCD Plus II Manual De Instrucciones

Notes

Safety notes

General safety notes

WARNING
Sources of danger are mechanical parts, for example, which can
cause serious personal injury.
Objects are also at risk (e.g. damage to the instrument).
WARNING
An electric shock can result in death or serious personal injury, and
also functional damage to objects (e.g. damage to the instrument).
WARNING
Never point the laser beam/ LED beam towards the eyes directly or
indirectly, via reflective surfaces. Laser radiation can cause irreparab-
le damage to the eyes.
WARNING
Unauthorised modification and/or changes to the instrument are not
permitted, for reasons of safety and approval (CE). In order to ensure
safe and reliable operation using the instrument, you must always
observe the safety instructions, warnings and the information contai-
ned in the section „Intended use".
WARNING
Please observe the following information before using the instrument:
| Do not operate the instrument anywhere near electrical welders,
induction heaters or other electromagnetic fields.
Further to abrupt temperature fluctuation, the instrument must be
|
allowed to adjust to the new ambient temperature for approx.
30 minutes before using it, in order to stabilise the IR sensor.
Do not expose the instrument to high temperatures for a long
|
period of time.
Avoid dusty and humid environments.
|
Measuring instruments and their accessories are not toys, and must
|
13