Berner LCD Plus II Manual De Instrucciones página 14

|
Please observe the five safety rules:
1. Disconnect
2. Ensure that the instrument cannot be switched back
3. Ensure isolation from the power supply
4. Earth and short-circuit
5. Cover adjacent live parts
Intended use
The instrument is intended strictly for use in applications described in the operating instruc-
tions. Any other usage is considered improper and forbidden, and can result in accidents or
the destruction of the instrument. Any such application will result in the immediate expiry of
all guarantee and warranty claims on the part of the operator against the manufacturer.
Remove the batteries if the instrument is not in use for a long period of time,
in order to protect the instrument from damage.
We assume no liability for damages to property or personal injury caused by
improper handling or failure to observe the safety instructions. Any warranty
claim expires in such cases. An exclamation mark in a triangle indicates sa-
fety notices in the operating instructions. Read the instructions completely
before beginning the initial commissioning. This instrument is
CE-approved and thus fulfils the required guidelines.
All rights reserved to alter specifications without prior notice
© 2015 Berner Trading Holding GmbH, Germany.
Disclaimer
The warranty claim expires in cases of damages caused by failure to ob-
serve the instructions!
We assume no liability for any resulting damage!
Berner is not responsible for damage resulting from
failure to observe the instructions
|
changes to the product that have not been approved by Berner or
|
be kept out of the reach of children!
In industrial facilities, the accident prevention regulations for
electrical systems and equipment, established by the employer's
liability insurance association, must be observed.
on again
(both poles deenergized)
14