Eldom COLUMBIA VAC WNC10 Manual De Instrucciones página 10

GENERAl DESCRIPTION
1. Nozzle
2. Protective mesh – front
3. Airscrew fixing nut
4. Clamp
5. Airscrew
6. Nut
7. Protective mesh – back
8. head
9. Container
10. humidification regulation
11. Base
12. tube
13. inner cover
14. Control panel with a display
15. Body
TECHNICAl DATA
- power: 80w
- supply voltage: 230V ~50hz
- container capacity 1.4 l
- output: 280 +- 30 ml/h
- humidifier output for a 15m
- humidifier operation time for a full container: approx. 5 hours.
INSTAllATION
Before first use, unpack the appliance and assemble its components.
- place the base of the appliance device on a stable and level surface
- unscrew the nuts (3 and 6) from the head pin (8),
- install the rear protective mesh (7). the mesh holes should match the
holes in the head (8), Fig. 1,
- attach the nut (6) by tightening it in a clockwise direction, Fig. 2,
- slide the airscrew (5) onto the pin, Fig. 3,
- fix the airscrew with the nut (3), by tightening it in a counter-clockwise
direction, Fig. 4
- loosen the screw in the clamp (4), and attach the clamp onto the installed
mesh (7)
- tighten the nozzle (1) to the front of the mesh (2), Fig. 5
- fit the mesh (2) into the clamp (4) and secure it by tightening the clamp
screw all the way.
- remove the container (9) from the base (11) and fit the inner cover
(13), Fig. 6
- lead the stretched tube through the opening in the body (15), and
connect its one end with the cover (13) Fig. 7
- connect the other end of the tube to the nozzle (1) Fig. 7
- rotate the container (9), unscrew the nut, and fill the container with
water. firmly tighten the nut.
- place the container on the base.
10
EN
1 2
2 room
operating instruction
fan with ultrasonic humidifier
3 4 5 6
15 13
WNC10
7 8
9
10
11
14 12
fig. 1
fig. 2
fig. 3
fig. 4