Eldom puri PO200 Manual De Instrucciones página 9

Tabla de contenido

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 38
11. Never leave the appliance unsupervised when in
use. Switch off the appliance if you have to go
away for even a short time.
12. Never pull the cord to unplug or move the appliance.
13. Never immerse the appliance in water or any other
liquid for any reason.
14. Keep the appliance away from water or oil splashes.
15. Respect the instructions for cleaning.
16. Do not insert sharp metallic objects or fingers in
the air swinging fins of the appliance.
17. Never repair the appliance yourself. All interventions
made by a non-qualified person can be dangerous.
As well any changing of the cord must be done by a
qualified electrician.
18. Never use accessories non-delivered by the supplier.
This could be dangerous and could damage the
appliance.
Special recommendations:
• Ambient temperature range for the device is 5°C -35°C
• Install appliance on a flat location with a large space, without obstacles. Leave a 20cm minimum
space between the unit and the wall.
• The device must be installed in accordance with national installation regulations.
• The plug shall be always accessible after its installation.
• Always place the appliance in a vertical position, in order to maintain the compressor in good
working condition.
• Do not tilt the device in any direction as spilled water can damage the device.
• Do not use the appliance near gas or other inflammable liquids.
• Do not block the air outlet and inlet ventilation. Do not place heavy objects on the device.
• Do not use spray (insecticides, painting) or any other inflammable products near the appliance
as the plastic case may be deformed. The unit may sustain electrical damage.
Power sources
• The plug has to be well fixed and should not be damaged.
• Do not plug in the appliance with an adaptor.
• Plug into the wall socket before switching on the appliance then press on the POWER button.
EN 9

Publicidad

Tabla de contenido

Solución de problemas

loading

Tabla de contenido