Tabla de contenido
Publicidad
Idiomas disponibles
Idiomas disponibles
11. Safety
Always supervise the use of this product.
For use indoors, in dry environments.
Use only the transformer (power supply) supplied with the Vibro Tub.
12. Technical Specification
Size:
145 x 145 x 72.5cmH
Input:
100-240V AC 1.5A 50-60Hz
Output:
12V DC 5A
13. Installation
1.
Two people should assemble this product together.
2.
Ensure that the Vibro Tub is sited in a suitable position near to two 240V / 120V
mains supply (i.e. wall sockets). You will need one socket for your music system and
a second socket for the transformer that illuminates the floor.
3.
Connect the electronic components to the raised floor – connect the DC plug from
the base to the socket on the isolating transformer (power supply).
Use only the power supply provided.
4.
Place the two straight walls in the corner, ensuring that they make a 90° angle. This
is important as failure to do this will probably sprain the joint.
Insert the wooden tongue B of one wall into the slot C of the other, ensuring that the
wooden hooks fully engage.
Publicidad
Tabla de contenido
