Tern Bicycles BioLogic Pango Manual Del Propietário página 4

• To ensure a maximum protection, the proper helmet size should be
chosen for each user. The helmet should be properly adjusted on the
head, the straps should not cover your ears, the buckle and straps
should be firmly but comfortably adjusted. The helmet should always
be attached on the head with the chin strap under the chin fastened
securely.
• Check adjustment before each use.
Prior to use, completely unfold the helmet.
• Unfold rear shell fully. (fig. 2)
• Pull out side shells until these audibly click into place on the hooks of
the rear shell. Whilst doing so, pull backward and hold the rear shell
with moderate force. The helmet is now unfolded to the maximum
head size. (fig. 4)
• Attention: The helmet must not be used with the side shells pushed in!
The helmet can be folded for transport.
• Lift adjusting clip A and pull the rear shell backward to the largest
position then lift adjustment clip A and fully push in the side shells.
(fig.7)
• Tuck straps up into top shell and fold the rear shell in. (fig.8-9)
• Ready for storage. (fig.10)
Instructions for Use
Unfolding for Use
Folding for Storage