Read Before Use; Usage; Emptying The Water Tank - JAP BIONIC ENIVIO D3 Manual De Instrucciones

Read before use

Carefully read the warning and safety precaution. Check the product for any visible damage.
If any, contact japproducts as soon as possible.

Usage

Before using this appliance please assemble it following the instructions below step by step.
1. Insert the adapter in the device and the plug in a suitable wall plug.
2. Press to turn on the device. Press
3. Press and hold
Press and hold
4. This device is equipped with a defrost function. It will automatically detect frost and stop
dehumidifying. After de-frosting it will continue to dehumidify.

Emptying the water tank

Note: The water tank has a maximum capacity of 600ml and a working capacity of 300ml per day.
Note: The LED indicator will turn red once the water tank is full. Device will automatically turn off.
1. Disconnect the power cable from the unit.
2. Avoid tilting and carefully slide out the water tank.
3. Remove the cover of the water tank.
4. Pour out the water.
5. Place back the cover and slide the water tank back in the device.
again to turn off the device.
for 3 seconds to turn the LED indicator off.
again to turn the LED indicator on.
7