Time Setting; Charging - Bethor Q70 Manual De Instrucciones

7. Long recording
During play mode with the earphones inserted, long press
pause.
Extra-long mode activation: When in pause mode, press
seconds (blue light flashes a few times). To deactivate it press
for 3 seconds (red light flashes a few times).
Extra-long recording: When activated, do not plug in the earphones
and restart the device (blue light flashes). Extra-long recording
is now on.

4. TIME SETTING

Connect the machine to the computer, and after entering the disk,
you will see the file called <Time synchronization tool>. Copy this file
to your desktop and open the folder. Double click<Voice recorder
synchronization tool>and check whether PC time is as accurate as
the figure shows. Click <Set Time>, as shown in the figure, and time
synchronization is completed.

5. CHARGING

1. Plug the micro USB into the port and connect it to a computer
or charger. It is recommended to connect the voice recorder to
the computer with a USB cable.
2. Use a power adapter with a charging current of 1A or less to
charge it, otherwise it may damage the voice recorder or cause
hazards (this product does not come with a power adapter).
3. When charging, the recorder flashes red; when the battery is
completely charged, the light is blue.
If you need to format the
machine, backup this folder to
prevent the loss of any file.
EN
to
for 3
9