Mittelmann RsqTeC COCOON Manual Del Usuario página 33

Inspection and General Instructions
Should there be doubts about the safe condition of the system or the component parts, these must be
•
replaced immediately. This must be carried out by the manufacturer or another qualified person.
Systems stressed by a fall must be taken out of use and be returned to the manufacturer or a qualified
•
workshop for servicing and re-examination.
Do not make any changes to the product.
•
Repairs must only be carried out by the manufacturer.
•
The instructions for use / test book are delivered with every rescue stretcher with carrying function. These
•
must be kept with the equipment.
Strictly observe the instructions for use of the products used in connection with the rescue stretcher with
•
carrying function as well as the relevant applicable accident prevention regulations.
The Declaration of Conformity can be downloaded from the www.mittelmann.com page.
•
As required, but at least once per year, an inspection by the manufacturer or a qualified person must be
•
carried out (see also Point 12 Damage Analysis). This inspection with the date must be documented in the
test book supplied. In addition, the next inspection date must be clearly recorded on the rating plate.
The rating plate with the year of manufacture and the serial number can be found in the rating plate pocket
•
on the left shoulder strap (e).
If the equipment is sold on in another country, the re-seller must provide instructions for the use, the
•
maintenance, the regular inspection and repair in the language of the other country.
The rescue stretcher with carrying function must not be used for fall arrest purposes.
•
Mittelmann Sicherheitstechnik GmbH & Co. KG - Bessemerstrasse 25 - DE-42551 Velbert
Phone: +49 (0)2051 / 91219-00 – Fax: +49 (0)2051 / 91219-19 – E-mail: info@mittelmann.com
- 16 -