Carton Contents; Before Using; Charging Procedure; Battery Charge Level Indicator - sunjoe AJWV100 Manual Del Operador

Unpacking

Carton Contents

• Cordless window vacuum cleaner
• Nozzle assembly
• USB charger adapter
• USB charger cable
• Manuals with registration card
1. Carefully remove the window vacuum cleaner and check
to see that all of the above items are supplied.
2. Inspect the product carefully to make sure no breakage or
damage occurred during shipping. If you find damaged or
missing parts, DO NOT return the unit to the store. Please
call the Snow Joe + Sun Joe
®
1-866-SNOWJOE (1-866-766-9563).
NOTE: Do not discard the shipping carton and packaging
material until you are ready to use your new window
vacuum. The packaging is made of recyclable materials.
Properly dispose of these materials in accordance with
local regulations.
IMPORTANT! The equipment and packaging material are not
toys. Do not let children play with plastic bags, foils, or small
parts. These items can be swallowed and pose a suffocation
risk!
Assembly
m
WARNING!
To avoid serious personal injury, read and
understand all safety instructions provided.
m
WARNING!
Do not switch on the unit until assembly is
complete. Failure to comply could result in accidental starting
and possible serious personal injury.
1. With the nozzle assembly slightly tilted as shown, connect
the nozzle assembly with the motor housing. Make sure
the tabs on the motor housing are inserted into the slots
on the nozzle assembly (Fig. 1).
Fig. 1
R
customer service center at
®
Tabs Nozzle assembly
Slots
2. Twist the nozzle assembly clockwise to lock the assembly
(Fig. 2). Shake the whole unit to make sure the nozzle
assembly is secured and won't come off.
Fig. 2

Before Using

Charging Procedure

The battery charger supplied matches the lithium-ion battery
installed in the tool. Do not use other battery chargers.
The lithium-ion battery is protected against deep discharging.
When the battery is empty, a protective circuit will
automatically switch OFF the equipment. The vacuum will no
longer work.
Charge the battery up to 4 hours then use it until it runs down.
Recharge for up to 4 hours again before resuming operation.
m
WARNING!
Continued and excessive overuse of the
ON/OFF button can permanently damage the lithium-ion
battery.
• During the charging procedure, the handle and the
housing of the tool will feel slightly warm to the touch.
This is normal.
• When no further use is planned for an extended period of
time, disconnect the battery charger from the outlet and
the unit.
• Do not use the tool during the charging procedure.

Battery Charge Level Indicator

The equipment has charger level indicator, which will illuminate
and indicate the charge level when the unit is being used.
• The charge indicator is lit blue: Battery charge level is
high.
• The charge indicator is flashing red: Battery charge level is
less than 3 V. Stop working and charge the battery.
5
Nozzle
assembly