LaserLiner VideoScope Manual De Instrucciones página 8

Camera head/Focus
The VideoScope is tted with a camera head as standard.
The head is set to a focus of F5 cm.
Objects far outside this range may appear blurred.
Instructions for use
• It is absolutely vital to ensure that the VideoScope does not come
into contact with chemicals, current, moving or hot objects. This
can damage the device and put its user at risk of serious injury.
• The LCD unit must not be immersed in water.
• The camera head is not acid-resistant or reproof.
• The VideoScope must not be used for medical examinations /
examining people.
• Strong vibrations and extreme deviations in temperature should be avoided.
• The unit is not suitable for taking measurements close to dangerous voltages.
Therefore always make sure that conductive parts are at zero potential when
carrying out measurements in the vicinity of electrical systems. Safe isolation
from the power supply and precautions to prevent systems being switched
on again must be ensured by implementing suitable measures.
08 GB
F5 cm
< F5 cm
> F5 cm