Vacation And Moving Care; Troubleshooting - Kitchen Aid KUWR204EPA Manual De Uso

Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

Do not use abrasive or harsh cleaners such as window sprays,
scouring cleansers, flammable fluids, cleaning waxes,
concentrated detergents, bleaches or cleansers containing
petroleum products on plastic parts, interior and door liners or
gaskets. Do not use paper towels, scouring pads, or other
harsh cleaning tools. These can scratch or damage materials.
To help remove odors, you can wash interior walls with a
mixture of warm water and baking soda (2 tbs to 1 qt
[26 g to 0.95 L] of water).
4. Wash stainless steel and painted metal exteriors with a clean
sponge or soft cloth and a mild detergent in warm water. Do not
use abrasive or harsh cleaners, or cleaners containing chlorine.
These can scratch or damage materials. Dry thoroughly with a
soft cloth.
NOTE: To keep your stainless steel wine cellar looking like new and to
remove minor scuffs or marks, it is suggested that you use the
manufacturer's approved Stainless Steel Cleaner and Polish. To order
the cleaner, see "Accessories."
IMPORTANT: This cleaner is for stainless steel parts only!
Do not allow the Stainless Steel Cleaner and Polish to come into
contact with any plastic parts such as the trim pieces, dispenser
covers or door gaskets. If unintentional contact does occur, clean
plastic part with a sponge and mild detergent in warm water. Dry
thoroughly with a soft cloth.
5. Replace the racks.
6. Clean the condenser coils regularly. They are located behind the
base grille. Coils may need to be cleaned as often as every other
month. This may help save energy.
Remove the base grille. See "Base Grille."
Use a vacuum cleaner with an extended attachment to clean
the condenser coils when they are dusty or dirty.
Try the solutions suggested here first in order to avoid the cost of an unnecessary service call.
Your wine cellar will not operate
WARNING
Electrical Shock Hazard
Plug into a grounded 3 prong outlet.
Do not remove ground prong.
Do not use an adapter.
Do not use an extension cord.
Failure to follow these instructions can result in death,
fire, or electrical shock.
Is the power supply cord unplugged? Plug into a grounded 3
prong outlet.
Has a household fuse blown, or has a circuit breaker tripped?
Replace the fuse or reset the circuit.
Is the Wine Cellar Control in Cool Off Mode? See "Using the
Controls."
12
7. Plug in wine cellar or reconnect power.
If you choose to turn the wine cellar off before you leave, follow these
steps.
1. Remove all wine bottles from the wine cellar.
2. Unplug the wine cellar.
3. Clean the wine cellar. See "Cleaning."
4. Tape a rubber or wood block to the top of the door to prop it open
When you are moving your wine cellar to a new home, follow these
steps to prepare it for the move.
1. Remove all wine bottles from the wine cellar.
2. Unplug the wine cellar.
3. Clean, wipe, and dry it thoroughly.
4. Take out all removable parts, wrap them well, and tape them
5. Tape the doors shut and tape the power cord to the wine cellar.
When you get to your new home, put everything back and refer to the
"Installation Instructions" section for preparation instructions.

TROUBLESHOOTING

Replace the base grille.

Vacation and Moving Care

Vacations
far enough for air to get in. This stops odor and mold from building
up.
Moving
together so they don't shift and rattle during the move.
The motor seems to run too much
Is the temperature outside hotter than normal? Expect the
motor to run longer under warm conditions. At normal
temperatures, expect your motor to run about 40% to 80% of the
time. Under warmer conditions, expect it to run even more of the
time.
Is the door opened often? Expect the motor to run longer when
this occurs. In order to conserve energy, try to get everything you
need out of the wine cellar at once. Keep wine bottles positioned
label side up so that they are easy to find, and close the door as
soon as the wine is removed.
Is the control set correctly for the surrounding conditions?
See "Using the Controls."
Is the door closed completely? Push the door firmly shut. If it
will not shut all the way, see "The door will not close completely"
later in this section.
Are the condenser coils dirty? This obstructs air transfer and
makes the motor work harder. Clean the condenser coils. See
"Cleaning."
Temperature is too warm
Is the door opened often? Be aware that the wine cellar will
warm when this occurs. In order to keep the wine cellar cool, try
to get everything you need out of the wine cellar at once. Keep
wine bottles positioned label side up so that they are easy to find,
and close the door as soon as the wine is removed.
Is the control set correctly for the surrounding conditions?
See "Using the Control."
Is the base grille blocked? For best performance, do not install
the wine cellar behind a cabinet door or block the base grille.

Publicidad

Tabla de contenido
loading

Este manual también es adecuado para:

Kuwl204epa

Tabla de contenido