Wet & Dry Vacuum Cleaner; Electrical Safety; Personal Safety - SKIL MASTERS F0158700 Serie Manual Original

Wet & Dry Vacuum cleaner
INTRODUCTION
• This appliance is intended for the collection and vacuuming
of non-flammable liquids as well as dry materials
• This appliance is intended for indoor use only and
suitable for industrial usage as required in hotels,
schools, hospitals, factories, shops, offices and
rental businesses
• This appliance is not suitable for vacuuming
hazardous dusts
• Read this instruction manual carefully before use and
save it for future reference 2
• Pay special attention to the safety instructions and
warnings; failure to follow the warnings and
instructions may result in electric shock, fire and/or
serious injury
• Check whether the packaging contains all parts as
illustrated in drawing 3
• When parts are missing or damaged, please contact
your dealer
TECHNICAL SPECIFICATIONS 1
APPLIANCE ELEMENTS 3
A Locking latch (2)
B Motor head
C Container
D Caster (4)
E Cartridge filter
F Vacuum hose
G Hose connection
H Extension tube (2)
J Airflow control handle
K Floor brush nozzle
L Round brush nozzle
M Crevice nozzle
N On/off switch
P Universal power tool adapter
Q Airflow regulator
R Cartridge filter protection
S Dust bag
T Foam sleeve filter
U Cable clip
V Ventilation slots
W Filter retainer
X HEPA Filter door
Z HEPA Filter
SAFETY

ELECTRICAL SAFETY

• Always check that the supply voltage is the same as the
voltage indicated on the nameplate of the appliance
(appliances with a rating of 230V or 240V can also be
connected to a 220V supply)
• Connect this earthed appliance only to a properly earthed
power supply system; ensure that socket and extension
cable have a functional protective conductor
• When operating the appliance in damp environments,
use a residual current device (RCD) with a triggering
current of 30 mA maximum
8700
• Always disconnect plug from power source during work
breaks, when not in use or when working on the
appliance (e.g. changing/cleaning filters), in order to
prevent accidental starting
• Switch off the appliance before disconnecting the plug
• Do not use the appliance when the power supply cable,
plug or switch is damaged
• If the power supply cable is damaged while working, do
not touch it, but immediately disconnect the plug
• Do not drive over, crush or stretch the power supply cable
• Do not pull the power supply cable to disconnect the plug
or to move the appliance
• A damaged power cord shall be replaced at a SKIL
service centre only in order to avoid a hazard

PERSONAL SAFETY

• This appliance is not intended for use by persons
(including children) with reduced physical, sensory
or mental capabilities, or lack of experience and
knowledge, unless they have been given
supervision or instruction concerning use of the
appliance by a person responsible for their safety
• Ensure that children do not play with the appliance
• Never vacuum materials that contain asbestos
(asbestos is considered carcinogenic)
• Do not vacuum inflammable or explosive fluids
(such as gasoline, oil, alcohol, solvents)
• Do not vacuum explosive dusts (such as coal dust,
magnesium dust, grain dust)
• Do not vacuum toxic materials
• Never vacuum hot ashes or pointed/sharp objects
• Do not operate the appliance in rooms where the
danger of an explosion exists
• Provide for good ventilation at the working place
• If foam or liquid escapes from the appliance, switch
off immediately
• Never operate the appliance without the necessary filters
as described in this manual
• Do not leave the appliance unattended when plugged in
• Use extra care when cleaning on stairs
• Regularly check the proper condition of the vacuum hose
(when doing so leave the vacuum hose mounted to
prevent dust from coming out)
• Keep the ventilation slots uncovered during vacuuming
WHEN CONNECTING NEW 3-PIN PLUG (U.K. ONLY):
• Do not connect the blue (= neutral) or brown (= live) wire
in the cord of this tool to the earth terminal of the plug
• If for any reason the old plug is cut off the cord of this tool,
it must be disposed of safely and not left unattended
USE
• Assembly 3 4
! ensure that the plug is disconnected from the
power source before assembling the appliance
- unlock latches A and lift motor head B off container C
- remove contents from container and turn it
upside down
- mount 4 casters D as illustrated
- the appliance is ready for dry vacuum cleaning with
cartridge filter E pre-installed
9