Expansion Pipe; Cable Tie - Viesta DH600-XA Manual De Instrucciones

1 pcs expansion pipe
7 Attach the expansion pipe on the outlet as shown below. Fix the expansion pipe on the outlet by cable tie.
Lift up expansion pipe till it out of the wall through the hole on the wall. See pic 4.
expansion pipe
2 pcs screw (ST4×40mm)
Pic. 3
The parts required for step 7
cable tie
Pic. 4
The parts required for step 8
6 Insert two screw (ST4×30 mm) into the safety holes
and fully fasten it to ensure the cooker hood is well fixed.
Note: The two safety vents are positioned on the back
housing, with diameter of 6mm..
1 pcs cable tie
1 pcs inside chimney bracket
[ EN ● 8 ]
Version: 4.0
KEN002DH 23.02.2021
2 screws
(ST4x30mm)