Setting The Time; Bluetooth Function - THOMSON DS110B Manual De Instrucciones

BLUETOOTH

SETTING THE TIME

• In standby mode, press and hold CLOCK: "CLK"
appears and the hour display flashes.
• Set the hours using TUNING 7/8.
• Press CLOCK to confirm, the minute display begins
flashing.
• Set the minutes using the TUNING 7/8.
• Press CLOCK to confirm.
• In playback mode, press CLOCK to display the time.
USE
RADIO FM
FM radio settings
After switching on the device:
• Select the TUNER mode by repeatedly pressing
SOURCE.
• Press TUNING 7/8 to search the frequency.
• Press and hold TUNING 7/8 for an auto search.
The search will stop when a radio station is tuned into
correctly.
• It is possible to directly access a frequency using the
numeric buttons on the remote control. For example,
press the keys 8, 9 and 8 to set a frequency of 89.8
MHz. If an incorrect frequency is entered, the message
"ERROR" will be displayed on the screen.
• Press MO/ST to switch between the FM STEREO and
FM MONO modes.
SAVING YOUR FAVOURITE RADIO STATIONS
• Set the desired station, then press MEM button till the
pre-selection number "P01" flashes on the screen.
• Use the CH +/- button to select the pre-selection
number from P01 to P20.
• Confirm the selection by pressing MEM button.
• Press the CH +/- button to access the saved stations.

BLUETOOTH FUNCTION

This device can receive an audio stereo signal from a
Bluetooth audio source peripheral. Check the instruction
manual of the peripheral device to ensure that the
distribution profile (A2DP) is taken into consideration for
optimal compatibility.
• Activate the Bluetooth function of the peripheral device.
• Switch on the device, and select the BT mode by
repeatedly pressing the SOURCE button. The Bluetooth
light flashes indicating a pending connection.
• Search for DS110B THOMSON on the source device.
Select the appropriate profile to synchronise the two
devices. (Default password: "0000").
• The connection is complete when the blue Bluetooth
light is stable. The screen displays CONNECT, followed
by BT + Volume.
• You can now play music from your Bluetooth device.
• Press the 12 button to play/pause.
• Press the TUNING w/s button on the device or
TUNING 7/8 on the remote control to switch from
one track to another.
• Press and hold the TUNING w/s button or TUNING
7/8 to scan back and forward the current track.
Note: The pairing (BT) function of the DS110B THOMSON
will be interrupted after about 75 seconds, if no device
is connected to it. The Bluetooth connection steps given
above are only used as reference. Refer to the instruction
manual of the Bluetooth peripheral for more details.
AUDIO RECEIVER
®
DS110B
DISCONNECTING/RE-CONNECTING TO THE SOURCE
BLUETOOTH AUDIO DEVICE
• Press q to switch off the device, and to disconnect the
• Switch on the DS110B THOMSON to automatically
Note: It is not possible to connect two Bluetooth audio
peripherals to the DS110B THOMSON at the same time.
Disable the Bluetooth function of the connected peripheral
and then press and hold PAIR/12 on the device or on the
remote control to search for the new Bluetooth peripheral to
be synchronised. Select the profile DS110B THOMSON on
the audio source.
SLEEP FUNCTION
In playback mode:
• Press SLEEP repeatedly to select the duration: 90, 80,
• The device switches off automatically at the end of this
Note: You can view the remaining time by pressing SLEEP.
Sound and volume settings
Press VOL + / - or TREBLE w/s or BASS w/s to adjust the
sound volume, or the treble and bass.
Silent mode
When a track is playing, press MUTE to mute or play the
sound.
RESET
The default settings of the device can be restored in
case of a problem. When the device stops functioning or
accidentally switches off. Use a pointed object (a paper clip
for example) to press the RESET button on the backside
of the device. The system restarts automatically. If the
procedure is successful, the time display flashes and is set
to zero.
Bluetooth peripheral.
reconnect to the most recent peripheral used.
70, 60, 50, 40, 30, 20, 10 minutes or OFF.
duration.
11 EN