Expansion Slots and Ports
BaseBox 2 model - 2.4 GHz, 802.11b/g/n.
•
BaseBox 5 model - 5 GHz, 802.11a/n.
•
BaseBox 6 model - 6 GHz, 802.11a/n.
•
One 10/100/1000 Gigabit Ethernet port, supporting automatic cross/straight cable correction (Auto MDI/X),
•
so you can use either straight or crossover cable for connecting to other network devices.
USB type A slot.
•
One miniPCIe slot. This device might be incompatible with R11e-LTE international modem.
•
Reset button
The reset button has three functions:
Hold this button during boot time until LED light starts flashing, release the button to reset RouterOS
•
configuration (total 5 seconds).
Keep holding for 5 more seconds, LED turns solid, release now to turn on CAP mode. The device will now
•
look for a CAPsMAN server (total 10 seconds).
Or Keep holding the button for 5 more seconds until LED turns off, then release it to make the
•
RouterBOARD look for Netinstall servers (total 15 seconds).
Regardless of the above option used, the system will load the backup RouterBOOT loader if the button is pressed
before power is applied to the device. Useful for RouterBOOT debugging and recovery.
Operating system support
The device supports RouterOS software version 6. The specific factory installed version number is indicated in the
RouterOS menu /system resource. Other operating systems have not been tested.
Safety Notice
Electric shock hazard. This equipment is to be serviced by trained personnel only. This is a class A
device, operating it near residential radio equipment could cause radio interference.
BasBox 6 model meets the Maximum TX power limit per ETSI regulations. An Operational mode in the 60 GHz
band: 58.32 GHz, 60.48 GHz, 62.64 GHz, 64.80 GHz. This device is certified for outdoor use in Point to Multipoint
applications. In the following countries this device cannot be used in Fixed Point-to-Point applications:
AT
BE
EE
FI
IT
LV
PT
RO
See mikrotik.com/products for the latest version of this document.
BG
HR
CY
CZ
FR
DE
EL
HU
LT
LU
MT
NL
SK
SI
ES
SE
DK
IE
PL
UK
Document #49326 Modified on: 16.MAY.2019