Adjusting The Cutting Height - SNOWJOE sunjoe 24V-X2-16LM Manual Del Operador

Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

4. Clip the cable clips on the handle to secure the cable
(Fig. 8).
Cable
clips
Grass Collection Bag Fitting
1. Fit the grass collection bag handle on the grass collection
bag by inserting the two tabs on the handle into the slots
on the bag, and pressing firmly until the handle clicks in
(Fig. 9).
Tab
Slot
Grass
collection
bag
2. With the ejector flap lifted up, hold the grass collection
bag by the handle and hook it in from above onto the
hooks on both sides (Fig. 10).
Grass
collection
bag
Fig. 8
3. Release the ejector flap so that it rests on the grass bag.
Operation
This lawn mower is intended for private residential use to cut
grass in small lawns and gardens. This lawn mower is not
intended to cut grass in public parks, playing fields, farms or
forests. Do not use this lawn mower for any application other
than that for which it is intended.

Adjusting the Cutting Height

This cordless lawn mower is equipped with a 6-position height
Fig. 9
Grass
adjustment lever to tailor grass cutting heights from 1.4 in. to
collection bag
3 in. (35 mm to 75 mm). To change the cutting height of the
handle
grass, follow the instructions below.
m
Tab
WARNING!
Slot
the batteries and the safety key from the lawn mower and wait
until the rotating blade has come to a complete standstill.
ALWAYS FOLLOW ALL SAFETY PRECAUTIONS AND
RECOMMENDATIONS LISTED PREVIOUSLY IN THIS
MANUAL.
1. Power off the lawn mower and remove the batteries and
the safety key.
2. Push the cutting height adjustment lever to the outside of
the original slot (Fig. 11).
Fig. 11
Height
adjustment
lever
12
Before making these adjustments, remove
Fig. 10

Publicidad

Tabla de contenido
loading

Tabla de contenido