EXALTA EL-058 Manual De Utilización página 13

INSTRUCTIONS FOR USE
Insert the plug into the wall socket and press the on-off button.
The display will show the preset temperature . Press the or
keys to set the desired temperatures ( from 80°C to 210°C)
After use, switch off the appliance and unplug it from the mains.
Allow to cool before storing.
Automatic safety shutdown after 60 minutes of non-use.
Universal voltage allows for using the device abroad. When you
use the unit at 100 V, it is possible that the heating times and
temperatures reached may change.
HANDLING ADVICE
Before use, make sure your hair is clean, dry and free of knots.
Divide the hair into sections before styling strands starting from
the lowest. Never use the product if your hair is still wet.
Separate a section of hair and place the widest part of the
conical iron 2 to 3 cm from you scalp.
Wind the section around the cone and finish by holding the tip
of the section against the stay-cool tip.
Hold the section of hair in this position for 5 to 8 seconds
de¬pending on your hair type.
Then glide the iron gently out of the section. For tighter and
bouncier curls, separate your hair into smaller sections. For
looser, softer curls, separate your hair into bigger sections.
Allow your curls to cool before handling them.
CLEANING AND MAINTENANCE
Turn off the appliance and unplug it. Place it on a heat resistant
surface until it is completely cooled.
Remove any hair or dust from the cylinder. Clean the cylinder
with a damp cloth. Store it in a safe, dry, dust-free place
TECHNICAL SPECIFICATIONS
Tourmaline ceramic barrel
Diameter from 25 mm to 13 mm
LCD Display
Adjustable temperature from 80°C to 210°C
Anti-scald point
With built-in support
Automatic safety shut off after 60 minutes
Universal voltage
Swivel cord: 3 m
Power Source: 100V-240 V ~ 50/60 Hz
Power: 45-50 W
13