Faqs; Additional Information; Fault Finding - Techne N ICE Manual Del Usuario

Q1 How can I cool the beads more quickly?
A1 If you intend to use the N o Ice to keep samples cool, then the bucket and beads can be
stored in a refrigerator and then inserted into the unit when required.
Q2 Is it possible to sterilise the beads?
A2 yes. place the beads in a suitable container and autoclave as you would for sterilising other
equipment. the beads can be autoclaved at up to 134°c.
If you require further technical or application assistance please contact Cole-Parmer at:
Cole-Parmer Ltd.
Service Department,
Beacon Road,
Stone,
Staffordshire,
ST15 0SA,
Email: cpservice@coleparmer.com
Phone: +44 (0)1785 810475
If you require further technical or application assistance please contact:
Email: cptechsupport@coleparmer.com
Phone: +44 (0)1785 810433
We are continually striving to improve our products and software. If you have any comments and
suggestions on how we can do things better please send them to us at: cptechsupport@coleparmer.com
Note that this equipment should only be dismantled by properly trained personnel. Removing
the outer cover exposes potentially lethal mains voltages. There are no user serviceable parts within this
equipment.

FAULT FINDING

Should you have any problems with your Nº ICE which cannot be easily remedied, you should
contact your supplier and return the unit if necessary. Please include details of the fault observed and
remember to return the unit in its original packing. Cole-Parmer accepts no responsibility for damage to
units which are not properly packed for shipping: if in doubt, contact your supplier, giving the full serial
number of the unit.
faQ's

ADDITIONAL INFORMATION

20