Installation; Connect Freetv200; Device Driver Installation For Windows Xp - Marmitek FREE TV 200 Modo De Empleo

FreeTV200_20120_20060620_man

5. Installation

5. To install the FreeTV200 Drivers for Window XP carry out the following:
1. Do not connect the FreeTV200 to a USB port yet (if you have already plugged it in,
disconnect it).
2. Place the FreeTV200 CD in your CD-ROM drive.
3. The installation window will appear on screen.
4. Select "FreeTV200 Drivers".
5. Select "next" in the driver setup menu.
6. Select "next" again in the Start Copying Files menu.
7. If the "Software Installation" menu is displayed again (2x), select "Continue Anyway".
8. After the FreeTV200 drivers have been installed, restart your computer before continuing.

5.1 Connect FreeTV200

Digital Antenna Cable, Antenna adapter cable, Remote Control, Tuner USB
To install the FreeTV200 into your computer, follow the steps below:
1. Connect the DVB-T antenna cable to
the connector.
2. Connect the Device to PC USB Hub.
5.2 Device Driver Installation for
Windows XP
Once you connect the FreeTV200 to the
USB port, you can just follow the system's
prompted message to finish the driver installation.
When you insert the FreeTV200, system will
appear with the "Found New Hardware"
dialogue.
Click "Next" to start installation.
FREE TV200
tm
20-06-2006 10:42 Pagina 5
5