Publicidad
Idiomas disponibles
Idiomas disponibles
globalindustrial.ca
Assembly Instructions
Customer Service
US: 1-800-645-2986
CONTENTS
Ref. Qty.
Description
1
1
Lens Cover
2
2
Cover Plate
3
2
Electrical Panel
M4 x .7 x 12mm. Lg.
H1
2
Phillips Screw
M4 x .7 x 7mm. Lg.
H2
1
Phillips Screw
H3
2
Wire Tie
GENERAL SAFETY INFORMATION
• To reduce the risk of property damage, personal injury, and/or death from
fire,
electric shock, falling equipment, and other hazards please read all
instructions and warnings.
• Installation, service, and maintenance should be performed by a qualified
licensed electrician.
• Fixture LEDs are not replaceable.
• DO NOT INSTALL DAMAGED PRODUCTS!
WARNING
RISK OF ELECTRICAL SHOCK
• Turn off electrical power at fuse or circuit breaker box prior to power supply
installation.
• Turn off power prior to performing any maintenance.
• Verify supply voltage accuracy.
• Ensure all electrical and grounded connections are in accordance with the
National Electrical Code and any other applicable local code requirements.
• All wiring connections should be capped with approved wire connectors.
CAUTION
RISK OF INJURY
• Wear gloves and safety glasses at all times during unit installation or
maintenance.
• Avoid direct eye exposure to light source.
CAUTION
RISK OF FIRE
• Keep combustible and other materials away
from luminaries and lamp/lens.
• Do not install insulation within 2 inches of light fixture
Instrucciones de Ensamblaje
Servicio de atención al Cliente
México: 01.800.681.6940
LED Security Light
Models 500908
1
Distribucion Industrial Globales S DE RL DE CF
Directives d'assemblage
Service à la clientèle
Canada: 888-645-2986
H1
1
1
Remove Lens Cover
2
052617
Publicidad
Tabla de contenido
Resumen de contenidos para Global Industrial 500908
- Página 1 Directives d’assemblage Customer Service Servicio de atención al Cliente Service à la clientèle México: 01.800.681.6940 Canada: 888-645-2986 US: 1-800-645-2986 LED Security Light Models 500908 CONTENTS Ref. Qty. Description Lens Cover Cover Plate Electrical Panel M4 x .7 x 12mm. Lg.
- Página 2 Assembly Instructions LED Security Light Drill Out Mounting Holes At These Locations Remove one of the electrical wire feed plug Be careful not to damage electrical panel when removing from cover plate Determine the mounting location and install cover plate to wall (using the appropriate hardware NOT SUPPLIED).
-
Página 3: Luz De Seguridad Led
Directives d’assemblage Customer Service Servicio de atención al Cliente Service à la clientèle México: 01.800.681.6940 Canada: 888-645-2986 US: 1-800-645-2986 Luz de Seguridad LED Models 500908 CONTENIDO Ref. Cant. Description Tapa de Lente Tapa del Plato Panel Eléctrico Tornillo Phillips M4 x .7 x 12mm. -
Página 4: Instrucciones De Ensamblaje
Instrucciones de Ensamblaje Luz de Seguridad LED Taladre orificios de montaje en estas ubicaciones Retire uno de los enchufes de alimentación del cable eléctrico Tenga cuidado de no dañar el panel eléctrico al retirar de la placa de cubierta Determine la ubicación de montaje e instale la placa de cubierta en la pared (utilizando el hardware apropiado NO SUMINISTRADO). -
Página 5: Lumiere Del Securitaire
Directives d’assemblage Customer Service Servicio de atención al Cliente Service à la clientèle México: 01.800.681.6940 Canada: 888-645-2986 US: 1-800-645-2986 Lumiere DEL Securitaire Models 500908 CONTENU Réf. Qté. Description Couvre-Lentilles Plaque de Protection Panneau Electrique Vis Cruciforme M4 x .7 x 12mm. Lg. -
Página 6: Directives D'assemblage
Directives d’assemblage Lumiere DEL Securitaire Percer les trous de montage aux endroits suivants Enlever l’un des bouchons du fil électrique d’alimentation Exercer une certaine prudence pour ne pas endommager le panneau électrique lorsque vous retirez la plaque protectrice Déterminer l’emplacement pour le monter et installer la plaque de protection au mur (en utilisant le matériel approprie qui n’est PAS FOURNI).