Global Industrial 500908 Instrucciones De Ensamblaje página 2

H2
2
Be careful not to damage electrical
panel when removing from cover plate
Determine the mounting location and
install cover plate to wall (using the
appropriate hardware NOT SUPPLIED).
4
Route cable from power source
through plug opening and tighten to
cover plate
6
H3
White = Neutral
Black = Positive
• Connect wires to the appropriate terminals.
• Make sure ALL wires are tucked in before
reinstalling the lens cover.
LED Security Light
3
Green = Ground
Drill Out Mounting Holes At These Locations
3
5
Be careful not to damage electrical
panel when attaching cover plate
7
Install the lens cover.
2
Assembly Instructions
Remove one of
the electrical wire
feed plug
H3
H2