Service And Support; Bluetooth Audio Transmitter; Faq - Tellur Morpheus Zeal Guia Del Usuario

6.Service and Support

If your device is not performing as it should, please take it to your local service providers or dealer for service.

7. Bluetooth Audio Transmitter

Bluetooth version: Bluetooth V2.1 + EDR
Frequance range: 2.4 GHz – 2.4835 GHz
Receiving sensitivity: -74 4db
Operating distance: up to 10 m
Working time: up to 8 hours
Charging time: about 2~3 hours
Battery: 270 mAh
Pairing: press and hold the Bluetooth boot button for 6 seconds, until the red and blue LED alternate
flash, open your Bluetooth device and put it into matching condition; the pairing between the Bluetooth
headsets and the transmitter will be done automatically

8.FAQ

1\ Why is there no power even when the Stereo Headphone is power on?
Ans: Ensure the battery is being charged up to 6 hours for first time using. The LED is lighted when it starts
charging.
2\There is no sound when playback.
Ans: Check the connection between with phone or computer, if the connection is not established, please
reconnect again. Make sure the is paired and connected target phone or other master device. your device
Stereo Headphone device
3\How can I know the Bluetooth Stereo Headphone has been fully charged?
Ans: When the indicator LED turns red to blue when it is charging, it has been fully charged.
4\Why the Headphone cannot connect to second phone
Ans: Please set the Headphone to pairing mode and short press the" M F B " to enable multipoint mode
Connect the Headphone to phone A, Restart the Headphone to pairing mode and connect the Headphone to
phone B, and then use phone A paired device list to reconnect to the Headphone