Hardware Installation; Installation Tips - Ubiquiti Networks mFi-THS Guia De Inicio Rapido

Tabla de contenido

Publicidad

Hardware Installation

Installation Tips

• Avoid installing the sensor in areas where it will face
direct or reflected sunlight.
• Avoid installing near windows and air conditioning or
heating vents.
• Do not locate the sensor on a wall opposite of external
doors or windows.
Instructions
1.
Locate the desired mounting location on the wall.
Use a pencil to mark two holes 6.1 cm apart from
each other. An optional wall-mount template can be
found on page 16.
2.
Use a 5.2 mm drill bit to drill the holes, and insert a
M6x28 Screw Anchor into each hole. Use a Phillips
screwdriver to secure a M3x25 Screw into each anchor.
Leave a clearance of approximately 2 mm between the
screw head and the wall.
Hardware Installation
3

Publicidad

Tabla de contenido
loading

Productos relacionados para Ubiquiti Networks mFi-THS

Tabla de contenido