Ubiquiti Networks mFi-THS Guia De Inicio Rapido página 8

mFi Temperature Sensor
™
6. Connect the other end of the CAT5/6 cable from the
sensor to an mFi RJ45 port on the mFi mPort.
You can now monitor the sensor from the mFi Controller
software. Refer to the User Guide on the CD‑ROM that
was included with your mFi mPort for instructions
on configuring the mFi Temperature Sensor in the
mFi Controller software. The User Guide can also be
downloaded from our website at
6
www.ubnt.com/mfi