Publicidad
Idiomas disponibles
Idiomas disponibles
How to straighten the hair
This plate is ideal for touch-ups, short and medium length hair. Comb or brush
the hair to remove any knot. Take a few tufts of average size hair; place the hair
between the two plates, press and run the plate along its entire length. Start
this movement from the roots and continue to the tips, without focusing on any
point, to avoid the tufts overheating. Lift the upper tufts and straighten the hair
underneath first and then move onto the tufts on top.
Caution: the plates are very hot and contact with the skin could cause burns.
CLEANING AND MAINTENANCE
Turn off the appliance by pressing the ON/OFF switch, take out the plug and
let the appliance cool down completely on a heat-resistant surface. Clean the
product with a soft damp cloth. Always keep the plates clean and free of dust, hair
products and gel. Never immerse the appliance into water or other liquids. Never
use aggressive solvents or detergents to clean the product. Never attempt to repair
the product by yourself, always contact an authorized assistance centre.
Class II appliance
This product has been designed and manufactured to comply with all
applicable European directives.
TECHNICAL CHARACTERISTICS
100% ceramic straightener
ON/OFF switch
Double voltage: 110V (15W) - max 180°C / 240V (21W) - max 200°C
Width of plates: 18mm
Power supply: 110-240V ~ 50-60Hz
Power: 15W (110V) / 21W (240V)
Cable length: 1.8 m
Operation use conditions:
Room temperature: from 10°C to 40°C. Relative humidity: from 30% to 75%
without condensation. Pressure: from 700 – 1060 hPa.
Environmental transportation and storage conditions: Temperature: from
10 to 40°C. Humidity: from 5 to 95%. Pressure: from 700 – 1060 hPa.
12
Publicidad
