Descargar Imprimir esta página

Joycare JC-475 Manual De Instrucciones página 11

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 25
GB
Never try to repair the product by yourself.
For any replacement: use always original spare parts or parts
of the same type.
In order to avoid the product from possible overheating,
it is advisable to unwind completely the cable and not
to keep the product switched on if it is not in use. Before
storing the unit, please let it cooling down. Never wrap the
cable around the unit.
If the item is used in bathroom, unplug it after use since
the proximity of water presents an hazard even when the
item is switched off.
INSTRUCTIONS FOR USE
Before connecting the plug to the mains, please check
that the on/off switch is in the OFF position. Plug the unit
to the mains. Switch the unit on; red LED light up. The
product will reach quickly the 200°C temperature.
Never use the product if your hair is still wet.
CAUTION: hair straighteners are powerful tools and
should always be used with extreme care. If you use the
unit in the wrong way, you can run the risk of over drying
your hair, even burning.
CAUTION: metal plates are hot, any contact with the skin
may cause skin burn.
HANDLINg ADVICE
Divide the hair into locks before you start styling. Start
with the lower locks.
Take a lock of hair and insert it between the two plates
near the roots of the hair, but avoid getting too close to
the scalp, press the handle to close the plate and wait a
few seconds.
Position the iron lower and avoid going over the same
locks that are already wavy. Use this procedure for the
entire length of the hair and always let the locks cool
down completely before modelling.
When you have finished using the appliance, press the
on/off button to turn off the curling iron. Remove the
plug and always wait until the appliance has completely
cooled down before storing it.
11

Publicidad

loading