USE / ASSEMBLY
USE OF THE APPLIANCE
Note: Dust cup filter (6) must always be used when operating the hand vacuum.
1. To open the dust cup (container) (5), push button (2) and pull out the dust cup (5).
Verify that the dust cup filter (6) is inside, then attach the dust cup (container) (5) to the hand vacuum
cleaner.
2.To attach the floor brush (7), the crevice nozzle (8) or brush (9) to the vacuum cleaner, push brush
into the suction hole (1), as shown below.
3.To clean floors, attach brush (7) to the extension tube (3 pieces), as shown below. It is also possible
to use the crevice nozzle (8) or the brush (9) with the extension tube.
15