How To Operate Your Hand Vacuum; Changing And Cleaning The Dust Cup Filter - Euroflex Cordless Monster 076 Manual De Instrucciones

HOW TO OPERATE YOUR HAND VACUUM

1. Hold the hand vacuum firmly with your hand on the handle (4).
2. Push the power switch (3) to "I" position.
3. Start vacuuming.
CAUTION: The Hand Vacuum is a very powerful unit. Make sure that you hold it firmly, otherwise it can
slip out of your hand and cause injury.
CHANGING AND CLEANING THE DUST CUP FILTER
Warning: To open the dust cup (container) (5), push button (2) and pull out the dust cup (5), (fig. 1).
1. Pull out the dust cup filter (6), (fig. 2).
2. Empty the dust from the dust cup filter (6).
3. Rinse the dust cup filter (6) in cold water. Wait until it dries up before replacing it into the dust cup
(container) (5).
4. Place the dust cup filter (6) carefully into the dust cup (container) (5).
5. Attach the dust cup (container) (5) to the hand vacuum.
fig.1 fig.2
CAUTION: The suction hole (1) must be open, free of any obstructions at all times. Otherwise, the motor
will overheat and could get damaged.
16