Lanaform Blood Pressure Monitor Manual De Instrucciones página 10

EN
To replace the batteries:
1. Open the battery cover in the direction indicated (see Figure 2).
2. Insert two AAA 1.5V alkaline batteries (not included), matching the polarities. Use the
symbols "+" and "-" to help you here (see Figure 2).
3. Replace the cover.
4. If the monitor is not to be used for a long time, please remove the two batteries.
PROCEDURE FOR SETTING THE DATE/TIME
1. Press Time Set button «
"month" value will blink first.
2. To set this value, please keep pressing the "(M)" button (the value will increase from 01 to
12 each time it is pressed).
3. Press the «
the other values one after the other, i.e. the date, year and time.
Please press the Time Set button again «
10
»to start the procedure for setting the date and time; the
» button again and follow the steps indicated below (Figure 3) to adjust
Version 02 of 15/01/2013
» to confirm and record the values set.