Clearing The Memory; Maintenance And Cleaning - Lanaform Blood Pressure Monitor Manual De Instrucciones

EN
- After the average reading is displayed on the screen, you can press the "M" button again to
call up the record history from 1 to 60, starting with the most recent records. (Figure 7).
- Press Time Set button «
record 1.

Clearing the memory

- To clear all records from the memory, please press button "M", holding it down until the
screen displays "Clr".
- This function is only operated under power-off mode.

MAINTENANCE AND CLEANING

1. Clean the device carefully using a damp cloth.
2. Do not immerse the device in water. If water enters the device, it could cause damage.
3. Do not use powerful detergents or solvents to clean the device or the cuff.
14
» to recall historical records backwards, i.e. from record 60 to
Version 02 of 15/01/2013