Technical Features - Lanaform Baby Nose Vacuum Manual De Instrucciones

• The collector bowls, suction nozzles and silicon seal can be sterilised
and should be cleaned using boiled water for approximately 3 minutes. To do
this, detach the different components as shown on the diagram and clean them.
Make sure that the various components are completely dry before replacing them
on the BABY NOSE VACUUM.
Note: The suction nozzles must be cleaned between each use of the BABY NOSE VACUUM.
To do this, detach the different components as shown on the diagram and clean them using boiled water.

TECHNICAL FEATURES

Maximum suction pressure
Power supply
Weight
Dimensions
Suction nozzles
Power supply
Operating environment
Storage and transport environment
ADVICE REGARDING THE DISPOSAL OF WASTE
• All the packaging is composed of materials that pose no hazard for the environment and which can be disposed of at your local
sorting centre to be used as secondary raw materials. The cardboard may be disposed of in a paper recycling bin. The packaging film must
be taken to your local sorting and recycling centre.
• When you have finished using the device, please dispose of it in an environmentally friendly way and in accordance with the law. Prior
to disposal, please remove the battery and dispose of it at a collection point so that it can be recycled.
Please note: under no circumstances should spent batteries be disposed of with household waste!!!
450 mmHg (60kPa)
2 x 1.5V AA alkaline batteries (not included)
127g
154 x 42 x 70mm
Soft silicone
3V/CD (2x1.5V AA)
Temperature: 15°C to 35°C humidity: up to 85% (no condensation)
Temperature : -20°C to 35°C. Humidity: up to 85% (no condensation)
EN
FR NL ES DE IT RU PL HR SL HU AR SV CS BG SK ET
version 2 du 25-03-2016 LANAFORM "Baby Nose Vacuum" 5 / 88