Using the device
3. Starting up
the vehicle.
1
jump lead
power bank
firstly the black battery clamp and then the red clamp
from the battery poles. Otherwise, it could result in
dangerous situations!
Leave the vehicle engine running.
Note: The button on the LED box
has no effect and must not be used. It is only used for
troubleshooting purposes during the manufacture of
the device.
z Charging mobile phones and tablets
Press the power switch
Connect your mobile phone or tablet's USB power
cable to the USB output (5 V
then to your mobile phone or tablet.
24
GB/IE/NI/CY/MT
B
2.
As soon as the vehicle starts, remove the
from the portable jump starter with
10
within 30 seconds and disconnect
1
7
A
1.
of the jump lead
11
.
/1 A
5
/2 A
) and
6