Using The Jumpstart Feature - ULTIMATE SPEED UMAP 12000 B2 Instrucciones De Funcionamiento Y De Seguridad

Connect the 3-way USB cable
„
connector
of the portable jump starter with power bank
4
Plug the AC adapter
„
Note: An undervoltage protection circuit is installed in
the portable jump starter with power bank
the device from damage. This prevents a deep discharge
of the portable jump starter with power bank
matically switches the device off once the battery is fully
discharged. Shortly before the undervoltage protection
circuit is activated, the last blue indicator light
to flash. As soon as the undervoltage protection circuit is
activated, the last blue indicator light
er will no longer be delivered. Please charge the portable
jump starter with power bank
z Using the jumpstart feature
When using the jumpstart, make sure that at least 3
„
indicator lights
on the charging connection (5V
16c
into a power socket.
15
are permanently illuminated.
8
GB/IE/NI/CY/MT
Using the device
to the Micro USB
16
1
flashes and pow-
8
1
again.
/1A)
.
1
to protect
1 and auto-
will start
8
21