Set-Up; Switching The Lamp On / Off; Dimming The Lamp; Switching The Lc Display Lighting On / Off - LIVARNO LUX 14137006L Instrucciones De Utilización Y De Seguridad

In the event of a leakage of batteries / recharge-
able batteries, immediately remove them from
the product to prevent damage.
Only use the same type of batteries / recharge-
able batteries. Do not mix used and new bat-
teries / rechargeable batteries.
Remove batteries / rechargeable batteries if the
product will not be used for a longer period.
Risk of damage of the product
Only use the specified type of battery / re-
chargeable battery!
Insert batteries / rechargeable batteries accord-
ing to polarity marks (+) and (-) on the battery /
rechargeable battery and the product.
Use a dry lint-free cloth or cotton swab to clean
the contacts on the battery / rechargeable bat-
tery and in the battery compartment before in-
serting!
Remove exhausted batteries / rechargeable
batteries from the product immediately.
Note:
This product has in addition to the button cell a built-in
rechargeable battery which cannot be replaced by
the user. The rechargeable battery must be removed
or replaced by the manufacturer or their service
centre or a similarly qualified person to avoid haz-
ards. When disposing of the product, you must indi-
cate this product contains a rechargeable battery.

Set-up

Note: Remove all packaging material from the
product.
Position the lamp on a flat surface.
To activate the lamp's LC display
the insulating strip on the battery compartment
. A melody will then sound.
11
To activate the light of the reflector
lamp must first be charged using the Micro-USB
cable. Charge the lamp by inserting one end of
the Micro-USB cable into the USB port
the other end of the Micro-USB cable into a
USB adapter.

Switching the lamp on / off

Switch the lamp on or off using the On / Off
touch button

Dimming the lamp

You can dim the lamp in three stages.
The brightest stage is activated automatically when
you switch on the lamp. By repeatedly pressing the
On / Off touch button
dimmed in 3 stages and switched off again.
Switching the LC display
lighting on / off
Switch the lighting on the LC display
off using the On / Off touch button
the lamp base

Functions

Time mode:
Alarm/ snooze
mode:
Timer mode:
, remove
1
Temperature
mode:
, the
6a
and
5
Safety / Set-up
on the lamp base
3 4
the lamp can be
3
1
2
. (A quick touch is sufficient.)
4
Displays time, date,
week, temperature;
12 / 24 hour format
(AM = morning,
PM = evening)
Set the alarm time and
select alarm signals;
snooze function can
also be operated at the
same time
Set time will be counted
down
Automatic display of the
current temperature: us-
ing the set button
you can select either °C
or °F.
GB/IE
.
on or
on
13
17