Casanoov TOUCH Manual Del Usuario página 6

[Tapez ici]
4. How to turn off/on the keypad buzzer
Each press on keypad would follow with beep sound. But you can set the keypad to be silent mode as
follow：
a. Enter programming mode => one long beep follow to confirm
b. Press ( 36 ) end up with ( # ). => one long beep and one short beep follow to confirm
c. Keypad exits programming mode.
Note! Factory default setting the buzzer is on. In silent mode, buzzer will only sound in programming mode,
but when press any button on the keypad, the backlight would flash to indicate. Keypad buzzer only has
on/off condition. You could repeat the above a and b operation to turn off/on the buzzer cyclically.
5. How to turn off/on the keypad backlight
To prolong the lifetime of battery in the keypad, it is advised to turn off the backlight of keypad.
Turn off/on the backlight as follow:
a. Enter programming => one long beep follow to confirm
b. Press ( 39 ) end up with ( # ). => one long beep and one short beep follow to confirm
Note! Factory default setting the backlight is on. Keypad backlight only has on/off condition. You could repeat
the above a and b operation to turn off/on the backlight cyclically.
6. How to check which channel a pin code belongs to ?
You can find which channel the pin code belongs to as follow:
a. Enter programming => one long beep follow to confirm
b. Press (86) end up with ( # ) => one long beep and one short beep follow to confirm
c. Enter the pin code of required channel you want check end up with ( # ). =>Keypad would indicate you the
channel's
number by the times of long beep sounds.
d. Keypad exits programming mode
Note! This programming is without long/short beep sound confirmation. For this operation, The times of the
long beep is used for indicating the channel's number.
EN
5