Care And Maintenance; Cleaning - Easy Home EDR050BAUW Manual Del Usuario

Operating
Continuous draining:
Water can be automatically emptied
into a floor drain by attaching the
unit to an ID ≥ 5/16" water hose with
a OD:M=1 male threaded end (not
included, a standard garden hose
works well). Install the drain hose
onto the adaptor A (see B1). The
adaptor is found in the accessory
bag located in the bucket. Remove
the plastic cover from the back drain
outlet of the unit and set it aside.
Remove the bucket, then insert the
drain hose through the drain outlet
of the unit and securely press it into
the connector on the front of the unit
(see B2 and B3).
Tighten the adaptor A and the unit by
using two screws (found in the buck-
et). Install the female threaded end
of the water hose into the adaptor A
(see B4), then lead the water hose
to the floor drain or a suitable drain-
age facility. Make sure the hose is
secure so there are no leaks. Direct
the hose toward the drain, making
sure that there are no kinks that will
stop the water from flowing. Place
the end of the hose into the drain
and make sure the end of the hose
is level or declining to let the water
flow smoothly. Place the bucket back
in the unit and make sure that it is
located correctly. Select the desired
humidity setting and fan speed on
the unit for continuous draining to
start.
16
B1.
Drain hose
Adaptor A
B2.
Plastic cover
Drain hose
subassembly
B3.
Connector
Drain hose
B4.
Water hose
Female thread
end
Accessories (for
continuous drain):
Drain hose (1 pc)
Adaptor A (1 pc)
Screw (2 pc)

Cleaning

1. Clean the grill and case
Use water and a mild detergent. Do not use bleach or
abrasives. Do not splash water directly onto the main unit.
Doing so may cause an electric shock, cause the insula-
tion to deteriorate, or cause the unit to rust. The air intake
and outlet grills become dirty easily, so use a vacuum
attachment or brush to clean.
2. Clean the bucket
Every few weeks, clean the bucket to prevent growth of
mold, mildew and bacteria. Partially fill the bucket with
clean water and add a small amount of mild detergent.
Swish it around in the bucket, empty and rinse. Do not
use a dishwasher to clean the bucket. After cleaning, the
bucket must be placed and properly positioned for the
dehumidifier to operate.
3. Clean the air filter
Remove and clean the filter every two weeks based on
normal operating conditions. Remove the filter from the
top of the unit (option A), or you can choose to remove the
bucket and then pull the filter downwards (option B). Wash
the filter with clean water, then dry. Re-install the filter, re-
place the bucket (option B). Press the "reset filter" button.
Caution: DO NOT operate the dehumidifier without a filter; dirt
and lint will clog the unit and affect performance.
4. When not using the unit for long periods of time
After turning the unit off, wait one day before emptying
the bucket. Clean the main unit, water bucket and air
filter. Cover the unit with a plastic bag. Wrap the cord and
bundle it with the band. Store the unit upright in a dry, well
ventilated place.
Important:
• Be sure to unplug the unit before cleaning or servicing.
• Do not use gasoline, paint thinner or other chemicals to
clean the unit.
• Do not wash the unit directly under a tap or using a hose.
It may cause electrical damage.
• If the power cord is damaged, contact the service depot
immediately

Care and maintenance

17