Cleaning And Maintenance - Easy Home HF3102A-UL Manual Del Usuario

Cleaning and maintenance

Portable humidifiers require regular cleaning in order to reduce the risk of bacterial
growth and also to remove any scale residue to maintain good operational
performance. Follow the procedures below for healthy maintenance of your Warm
mist humidifier.
CAUTION!
NEVER PLUG OR UNPLUG HUMIDIFIER WITH WET HANDS.
Always be sure that the humidifier is unplugged and switched OFF
before cleaning or attempting to clean or store the item.
DO NOT leave water in water tank (p. 3, fig. A
use as it may result in the buildup of mineral deposits and bacteria that can inhibit
the output efficiency of the humidifier. PLEASE NOTE that if water remains in the
water tank for more than a day or two, bacterial growth is possible.
NOTE: When removing water tank, water may accumulate under vapor lid and on
the bottom of the water tank. It is recommended to have a dry cloth ready to dry
wet surfaces.
Disinfecting the water tank and water basin
1. Turn switch to off (O) and unplug from the wall outlet.
2. Be sure the unit has cooled for at least 15 minutes. Lift the water tank
the base and place in a sink or tub.
3. Fill water tank with ½ cup water and 1 tablespoon of vinegar.
4. Let it stand twenty minutes, shaking vigorously with two hands every few
minutes.
5. Carefully empty the tank after 20 minutes, and rinse with warm water until you
can no longer detect a vinegar smell.
NOTE: It is recommended to clean humidifier with the water and white vinegar so-
lution as stated above after using the humidifier about once a week or if cleaning
seems necessary.
IMPORTANT: Failure to keep this humidifier clean from mineral deposits normally
contained in any water supply will affect the efficiency of the operation. Customer
failure to follow these instructions may void the warranty.
How to clean the heating element in the base
1. To remove the mist chamber, slide the mist chamber latch to the left and carefully
lift the mist chamber off the water basin.
2. Fill the heating element with undiluted white vinegar.
Cleaning and maintenance
9 ) or water basin when unit is not in
9 from
19