Description (Fig. A) - Princess Blender Compact White Manual Del Usuario

Description (fig. A)

Your 217000/217400 Princess blender has
been designed for the following applications:
mashing fruits and vegetables; preparing
smoothies, shakes and juices; preparing cold
soups; preparing dressings, dips and sauces.
The maximum capacity of the jar is 800 ml.
The maximum capacity of the bottle is 500 ml.
The appliance is suitable for indoor use only.
The appliance is suitable for domestic use only.
Before you proceed, we need you to pay
attention to the following notes:
­ The appliance has been designed for
mixing cold and lukewarm ingredients
(max. 55 °C). It is recommended not to use
the appliance for mixing hot liquids and
solids. Hot liquids and solids can easily
cause the jar to break and the jar lid to
abruptly come off the appliance due to
steam pressure. Keep the jar lid pressed
with your hand when mixing lukewarm
liquids to prevent leakage.
1. On/off button
2. Power indicator
3. Blade
4. Seal ring
5. Jar
6. Jar lid
7. Jar lid insert
8. Bottle (217400 only)
9. Bottle lid (217400 only)
10. Juice level indicator
Assembly (fig. A & B)
Before you proceed, we need you to pay
attention to the following notes:
­ Before assembly or disassembly, switch off
the appliance, remove the mains plug from
the wall socket and wait until the appliance
has cooled down.
217000 / 217400: Mounting the jar
(fig. A)
• Place the seal ring (4) onto the blade (3).
• Mount the blade (3) to the bottom of the
jar (5). Lock the blade (5) by turning it
clockwise.
• Mount the jar (5) onto the appliance. Lock
the jar (5) by turning it clockwise.
• Mount the jar lid (6) onto the jar (5).
• Mount the jar lid insert (7) into the jar lid
(6). Lock the jar lid insert (7) by turning it
clockwise.
217400: Mounting the bottle (fig. B)
• Fig. B1: Loosen the lid (9) from the bottle
(8).
• Fig. B2: Place the seal ring (4) onto the
blade (3). Tighten the blade (3) onto the
bottle (8).
• Fig. B3: Turn the bottle (8) upside down.
Place the bottle (8) onto the appliance.
Lock the bottle (8) by turning it clockwise
until it clicks into place.
Use
Switching on and off (fig. A)
Before you proceed, we need you to pay
attention to the following notes:
­ Do not switch on the appliance when the
jar or the bottle is empty.
­ Do not leave the appliance switched on
continuously for more than two minutes.
After two minutes, switch off the appliance
and allow it to cool down for three
minutes before switching it on again.
• To switch on the appliance with continuous
low speed, set the on/off switch (1) to the
"I" position.
• To switch on the appliance with continuous
high speed, set the on/off switch (1) to the
"II" position.
• To switch on the appliance in pulse mode,
set the on/off switch (1) to the "P" position.
• To switch off the appliance, set the on/off
switch (1) to the "O" position.
Hints for use
Before you proceed, we need you to pay
attention to the following notes:
­ Do not exceed the maximum mark on the
juice level indicator.
16