Publicidad
Idiomas disponibles
Idiomas disponibles
Battery Run Time Indicator Light
• Green light: full power
• Red light: low power
(Estimated run time left is 20 minutes);
light needs charging.
• The Type-C USB charging outlet is located on the bottom below the rubberized protective cover. The charging process is
indicated by a red LED light on the charge control indicator. When fully charged, the light will change to green.
• For first time use, charge your light for 3 - 4 hours before use, and allow 3 - 5 cycles of charging and discharging the
battery for optimum performance.
• Store the light in a dry place away from direct sunlight.
• Remove the charger adapter plug from the wall AC outlet when moving, otherwise it may cause damage to the power
cord, resulting in a fire.
• Unplug the charger adapter plug from the AC outlet for safety purposes when cleaning or leaving the unit unused for
more than a day. Doing otherwise may cause a fire or electric shock.
LAMP
TOP LIGHT
UTL12A-05
USB-C CABLE
RECHARGEABLE LIGHT
TOOL USE INSTRUCTIONS
PRODUCT LAYOUT
MAGNET
INDICATOR LIGHT
UTL12-04
WALL ADAPTER
ULTRA THIN
On/Off Switch
• Press switch once: top flashlight on
• Press switch a second time: full brightness
• Press switch a third time: low brightness
• Press switch a fourth time: off
A
B
MICRO TYPE-C USB
SWITCH
Page 2
UTL12A
Magnetic Base Removal
1: Push the tab with your thumb
along the "A" direction to release lock
2: Pull the magnetic base clip along
the "B" direction
HOLDER
• UTL12-01 Buckle Clip
• UTL12-02 Adjust Nut
• UTL12-03 Magnetic Base & Hook
MAGNET
HOOK
2010173-14
Publicidad
