System Setup
Reset the Filter Cycle
Press and hold the button for each corresponding filter for 3 seconds to initiate the
new filter cycle.
The filter cycle is reset when the LED light turns green.
Leak Detection
NOTE: The filtration system comes equipped with a leak detection alarm.
NOTE: The leak detection alarm can be disabled for 5 minute intervals. The water
must be cleaned from under the filtration system in order for the alarm not to sound
again.
To disable the alarm, press and hold the top and middle button simultaneously
for 5 seconds.
KOHLER Konnect
Refer to the Quick Reference Guide provided with the filtration system to use the
KOHLER Konnect features.
1410821-5-B
10
Kohler Co.