Behringer SD16 Manual Del Usuario página 15

Tabla de contenido

Publicidad

28
SD16/SD8
Specifications
Processing
A/D-D/A conversion (Cirrus Logic A/D CS5368, D/A CS4385)
Networked I/O latency (stagebox in > console processing* > stagebox out)
Connectors
Programmable mic preamps, designed by MIDAS, balanced XLR/TRS combo
Line outputs, balanced XLR
ULTRANET outputs, RJ45
(power supplied for BEHRINGER P16-M personal mixers)
AES50 SuperMac networking, Neutrik ethercon
USB port for system updates, type B
Mic Input Characteristics
Preamp design
THD + noise, 20 dB gain, 0 dBu out
Phantom power, switchable per input
Equivalent input noise level, XLR (input shorted)
CMRR, XLR, @ 20 dB gain (typical)
CMRR, XLR, @ 40 dB gain
Input/Output Characteristics
Frequency range, @ 48 kHz sample rate, 0 dB to -1 dB
Dynamic range, analog mic in to analog out (typical)
A/D dynamic range, mic preamp to converter (typical)
D/A dynamic range, converter and output
Cross talk rejection @ 1 kHz, adjacent channels
Mic input impedance XLR jack, unbal. / bal.
Non clip maximum input level, XLR
Hi-Z input impedance TRS jack, unbal. / bal.
Line input impedance TRS jack, unbal. / bal.
Non clip maximum input level, TRS
Output Characteristics
Output impedance, XLR, unbal. / bal.
Output level, XLR, nom. / max.
Residual noise level, XLR
SD16
SD8
24-bit @ 44.1 / 48 kHz, 114 dB dynamic range
1.1 ms
16
8
8
4
2
2
1
MIDAS
< 0.005%, A-weighted
48 V
-128 dBu, A-weighted
>60 dB
>65 dB
10 Hz - 22 kHz
105 dB
109 dB
108 dB
90 dB
5 kΩ / 10 kΩ
+23 dBu
1 MΩ / 2 MΩ
20 kΩ / 40 kΩ
+21 dBu
50 Ω / 50 Ω
+4 dBu / +21 dBu
-88 dBu, A-weighted
29
Quick Start Guide
Digital In/Out
AES50 SuperMac networking @ 48 or 44.1 kHz, 24-bit PCM
AES50 SuperMac cable length, CAT5 shielded**
ULTRANET networking @ 48 or 44.1 kHz, 22-bit PCM
ULTRANET cable length, CAT5 shielded
ULTRANET phantom power for P16-M personal mixers
Power
Switch-mode autorange power supply
Power consumption
Physical
Standard operating temperature range
Dimensions
Weight
* Incl. all channel and bus processing, excl. insert eff ects and line delays
** KLARK TEKNIK NCAT5E-50M recommended
NOTE: Please verify that your specifi c AES50 connections provide stable operation prior to using the products in a live performance or recording
situation. The maximum distance for AES50 CAT5 connections is 100 m / 330 ft. Please consider using shorter connections where possible for gaining
safety margin. Combining 2 or more cables with extension connectors can reduce the reliability and maximum distance between AES50 products.
Unshielded (UTP) cable may work well for many applications, but entails an additional risk for ESD issues. We guarantee, that all our products will
perform as specifi ed with 50 m of KLARK TEKNIK NCAT5E-50M, and we recommend using cable of similar quality, only. KLARK TEKNIK also off ers the very
cost-eff ective DN9610 AES50 Repeater or DN9620 AES50 Extender for situations where extremely long cable runs are required.
2 x 48 channels, bidirectional
Up to 100 m
1 x 16 channels, unidirectional
Up to 75 m
2 powered outputs
100-240 V (50/60 Hz)
45 W
35 W
5°C – 40°C
5°C – 40°C
(41°F – 104°F)
(41°F – 104°F)
333 x 149 x 140 mm
333 x 149 x 95 mm
(13.1 x 5.9 x 5.5 in)
(13.1 x 5.9 x 3.7 in)
3.2 kg (7.1 lbs)
2.5 kg (5.5 lbs)

Publicidad

Tabla de contenido
loading

Este manual también es adecuado para:

Sd8

Tabla de contenido