Mellerware GLOW Manual De Instrucciones página 3

industrial or professional use. It is not intended to be
used by guests in hospitality environments such as
bed and breakfast, hotels, motels, and other types of
residential environments, even in farm houses, areas
environments.
2.2.4. This appliance is not intended for use by
persons (including children) with reduced physical,
sensory or mental capabilities, or lack of experience
and knowledge, unless they have been given supervi-
sion or instruction concerning use of the appliance by
a person responsible for their safety.
2.2.5. This appliance is not a toy. Children should be
supervised to ensure that they do not play with the
appliance.
2.3. Use and care:
2.3.1. Fully unroll the appliance's power cable before
each use.
2.3.2. Do not use the appliance if the parts or acces-
2.3.3. Do not use the appliance when empty.
2.3.4. Do not leave the appliance unattended when
connected to the mains power supply.
2.3.5. Do not cover the soleplate while the appliance is
plugged in.
2.3.6. Unplug the appliance from the mains power
supply when not in use and before undertaking any
cleaning task.
2.3.7. This appliance should be stored out of reach of
children.
2.3.8. Do not store the appliance if it is still hot.
2.3.9. Never leave the appliance unattended when in
use and keep out of the reach of children.
2.3.10. If, for some reason, the appliance were to catch
supply and DO NOT USE WATER TO PUT THE FIRE
OUT.
2.4. Service:
2.4.1. Make sure that the appliance is serviced only
spare parts or accessories are used to replace existing
parts/accessories.
2.4.2. If the power cord is damaged, the manufacturer
replace it in order to avoid a hazard.
2.4.3. Any misuse or failure to follow the instructions
for use renders the guarantee and the manufacturer's
liability null and void.
3. Instructions for use
3.1. Before use:
plicable).
clean the parts that will come into contact with clothes
in the manner described in the cleaning section.
3.2. Use and care:
3.2.1. Unroll the power cord completely before plug-
ging it in.
surface.
3.2.3. Connect the appliance to the mains power sup-
ply.
3.2 Filling with water:
3.2.1 Ensure the appliance is disconnected from the
mains power supply.
3.2.2 Turn the steam control knob to position "0" or
Minimum.
not exceed the MAX level mark on the water tank.)
3.3. Setting the temperature:
LABEL TYPE OF TEXTILE
Do not iron this article
Synthetics, Nylon, Acrylics,
•
Polyester, Rayon
•• Wool, Silk
••• Cotton, Linen
3.3.1 Stand the iron upright.
3.3.2 Set the temperature control knob (M) to the
desired ironing temperature.
3.3.3 Insert the mains plug in the main power supply.
3.3.4 After the pilot light has switch off and on, it
means you may start ironing. The pilot light will switch
on and off from time to time during ironing. When
the pilot light is illuminated it means the ironing is
heating. When the pilot light is off it means the desired
temperature is reached.
3.4 Steam – ironing: