Operation; Turbo Function - Gioteck HF-1 Manual De Instrucciones

operating your controller
To power on your controller, press and hold the home button for 2 seconds until a red LED appears in the
crescent. To power off your controller, press and hold the home button for 1 second.
The HF-1 will
go into sleep
mode if not
used for 10
minutes. To
wake up the
controller,
press the
Home button.

08 | OPERATION

turbo function

Pressing an action button assigned
with turbo will simulate the button being
pressed rapidly e.g. "boost firepower".
To enable turbo function: While pressing
the Turbo button, press & release the
action button you wish to turbo.
To switch turbo off, repeat the
procedure above. NOTE: More than one
button can be assigned the turbo
function at any one time.
To clear all turbo functions: Press & hold
the Turbo button ONLY for 12 seconds.
flip switch
The Flip switch swaps the
functions assigned to the L1 & L2
and R1 & R2 buttons.
02
01
OPERATION | 09