Mellerware PURIFY Manual De Instrucciones página 2

Dear customer,
Thank you for choosing to purchase a Mellerware
brand product. Thanks to its technology, design and
operation and the fact that it exceeds the strictest qual-
ity standards, a fully satisfactory use and long product
life can be assured.
1. Parts description
1. Top cover
2. Filtered / unfiltered water changeable Switch
3. Tap connector ring
4. Filter replacement indicator ring
5. Main base
6. Water pressure buffer
7. Ceramic filter
2. Safety advice and warnings!
Read these instructions carefully before using this
product and keep them for future reference. Failure to
follow and observe these instructions could lead to
an accident. Clean all the parts of the product that will
be in contact with water, as indicated in the cleaning
section, before use.
3.1. Product parts / product features
3.2. Use and care:
3.2.1. Filter configuration
1
2
1. Diatom ceramic filter element: Removes any heavy
3
metal sediments, rust, silt, redworm, etc from the
4 water.
5
2. Coconut shell activated carbon: The large
6
internal surface of activated carbon makes it
excellent at absorbing many contaminants in
drinking water, leaving the water cleaner, and
better tasting.
3. Maifan stone balls: Maifan stones are known as
7 nature's miracle. Maifan stones contain plenty of
micro-nutrient elements which are essential to the
human body and has been used for centuries by the
Chinese to cure a variety of health issues.
4. Alkaline minerals: Reduces acidity and
balances PH levels in the water
5. Chlorine removal energy ball: The chlorine removal
energy ball aims at removing the last amounts of
chlorine from the drinking water that may have passed
the first four stages of filtration.
3.2.2. Use
3.2.2.1. Screw off the top cover by gently turning it to
left
3.2.2.2. Insert the ceramic filter to the base.
3.2.2.3. Put back the top cover by gently turning it to
the right.
3.2.2.4. When that is done, depending on the size of
the tap, connect the suitable tap connector to the filter
unit.
3.2.2.5. Put the connector ring to the tap and turn it to
the right (clockwise) until it becomes rigid.
3.2.2.6. For filtered water turn the changeable switch to
the left (anticlockwise) till it gets rigid, to get unfiltered
water turn the changeable switch to the right (clock-
wise) till it gets rigid.
1
2
3
4
5