Tabla de contenido
Publicidad
44
Bugera 1960 INFINIUM
Bugera 1960 INFINIUM Wiring the Bugera
Step 5: Wiring the
(EN)
Bugera
CAUTION!
Hot! Risk of injury! During use, the valves
will get very hot and high surface
temperatures may be reached at the rear of
this unit. To avoid burning yourself, make all
connections while the unit is still cold.
ATTENTION!
To avoid damage to your amp, never use
the Bugera valve amplifier without a
loudspeaker connected!
If you only connect one speaker cabinet, be sure that
the IMPEDANCE switch is set to match the impedance
of the connected cabinet. If you want to connect two
speaker cabinets, both cabinets should have to the
same impedance. Be sure to have set the IMPEDANCE
switch correctly.
CAUTION: The loudspeakers in the combos are
connected in series. This results in an impedance
of 16 Ohms. Please ensure that the IMPEDANCE
switch is set to this value (16 Ohm when using
combo-version with internal speakers).
Publicidad
Tabla de contenido
