Uline H-4918 Instrucciones De Montaje página 2

Figure 2
Left Side
Bottom
Figure 3
Longer
Side
Figure 4
Figure 5
PAGE 2 OF 6
ASSEMBLY INSTRUCTIONS CONTINUED
Top
Middle
Back Panels
Shelf
Shorter
Side
Shorter
Side
Longer
Side
3. Lay both back panel pieces down flat, overlapping
them so their overall length matches that of the
assembled sides. Align left assembled side so the
post is underneath the back panels. (See Figure 2)
Top
Shelf 4. Starting at the top shelf, insert bolt through shorter
side of posts, back panel and shelf and secure with
locknut. Then, insert bolt through shorter side of front
post and into front of shelf. Secure with locknut.
(See Figure 2)
Shelf
5. Attach middle shelf to left assembled side in the
same manner as the top shelf. Middle shelf is
located at the upper hole where the back panels
overlap. (See Figure 2)
6. Attach bottom shelf in the same manner as the top
and middle shelves. Bottom shelf is located at third
hole from the bottom of post. (See Figure 3)
7. Attach assembled right side to top, middle and
bottom shelves by inserting bolts through shorter side
of posts, back panel and shelf. Secure with locknuts.
Ensure that the post is underneath the back panels.
Right
Side
Then, insert bolts through shorter side of front post and
into front of shelves. Secure with locknuts. (See Figure 4)
8. Attach remaining shelves every sixth hole to evenly
distribute shelves.
9. Stand unit up. Use wrench and screwdriver to tighten
all bolts. (See Figure 5)
1-800-295-5510
uline.com
0821 IH-4918