Tabla de contenido
Publicidad
Idiomas disponibles
Idiomas disponibles
Table of Contents
Japanese
IMPORTANT SAFETY INSTRUCTIONS
1
2
Read all the instructions and cautions before
4
5
7
Do NOT disassemble or attempt to repair the module.
7
Do NOT allow water to enter the module, the Goal Zero Yeti
9
10
Make sure all connections are tight and secure before using.
18
Do NOT exceed 22V input for the module; this can cause
26
serious damage to the Yeti Lithium and potential bodily
34
injury. Check specs for third party solar panels and lead acid
batteries before attempting to use them with the module.
Do NOT chain third party solar panels or lead acid batteries
in series (connecting positive to negative, positive to
negative, etc.), as this can result in dangerously high levels
of voltage that can cause serious damage to the Yeti Lithium
Compatible with Yeti 1000, 1400 and Yeti 3000 Lithium
WARNING: Never connect a power source to the Yeti Link before
installing into the Yeti. Always connect the Link to the Yeti before
connecting any power source.
WARNING: Do not exceed 22V input for the Link. Doing so can cause
serious damage to the Yeti and potential bodily injury. Take note of
voltages when using third party solar panels or third party lead acid
batteries with the module. Do not chain solar panels or lead acid
batteries in series (positive to negative, positive to negative, etc.), as
this can result in dangerously high voltages.
Please save these instructions
beginning installation.
Lithium, or the Goal Zero Yeti Tank.
and potential bodily injury.
Power Stations
1
1
Publicidad
Tabla de contenido
