Publicidad
4
1.
Connect the SMART CANBUS (load resistor) plug to the vehicle connector.
2.
Connect the SMART CANBUS (load resistor) socket with the headlight.
5
Mount the SMART CANBUS (load resistor) to the vehicle's body (metal).
Please note:
Pull the cable ties until they are taut.
6
F45 / 46: Remount the windshield washer fluid reservoir.
7
ON
For questions regarding maintenance or technical problems, please contact OSRAM customer service via
automotive-service@osram.com .
Installation instructions for electronic load resistor
4)
ON
6)
1)
LEDSC03 / LEDSC03-1
3)
5)
2
Publicidad
